FS-EN417-HEAD
EN417 Torch Head (1300°C, Cartridge Torch)
The hot head of the EN417 range, on its own. Electronic piezo ignition fires it with one thumb, a built-in air-mix fan holds the flame steady in draughts, and the burner reaches 1300°C - hot enough for metal-tube soldering, small brazing jobs and workshop heating that defeats ordinary heads. It threads straight onto a standard EN417 butane cartridge: no cylinder, no hose, nothing pressurised in the post.
Campingaz CV270 / CV300 / CV470 are examples of the EN417 cans our trade buyers stock - model names are not a brand-fit claim. We confirm the fit against the cartridge you hold before your first order. Cartridge not standard EN417? Send details → /contact/.
Sizes
| SPEC | VALUE |
|---|---|
| Model (factory reference) | 604 |
| Max flame temperature | 1300°C |
| Body material | Iron + zinc alloy |
| Ignition | Electronic piezo |
| Flame stabilisation | Built-in air-mix fan |
| Windproof | Yes |
| Net weight | 150 g |
| Body size (L×W×H) | 17 × 4.5 × 5.5 cm |
| Fuel | Butane (EN417 cartridge, not included) |
| In the box | Torch head only - no cartridge, no accessories |
| Carton pack | 100 pcs |
Fits these torch models
Not sure your model is covered? Send it to us and we'll confirm the right part before you order - free fit matching.
Ask About Your ModelASK ABOUT THIS PART
Not sure it fits? Ask here.
Send the torch you run and what you need. We confirm the fit, the size and the pack before you commit to an order - one business day, no obligation.
Prefer the full form (country, quantities, wholesale)? Open the contact page.
Specification
- Iron and zinc-alloy body
- Electronic piezo ignition - no flint wear
- Built-in air-mix fan for a stable flame in draughts
- Copper-colour finish
- RoHS/REACH statement in About
- Check local gas-appliance rules before fitting (EU/UK GAR applies to gas appliances; this is a spare part)
Pairs well with
FS-EN417-HEAD-RODS
EN417 Torch Head + Test Brazing Rods (Aluminium & Copper)
The same 1300°C EN417 head, supplied with a test pack of aluminium and copper brazing rods. The point is to prove it on your own work before committing to bulk: light it, braze a scrap joint, and judge the finish yourself. Rods travel alongside the head, so one order gets you both. Screws onto a standard EN417 butane cartridge - no cylinder, no hose.
FS-EN417-HEAD-KIT
EN417 Torch Head + Service Kit (Spare Seals & Screwdriver)
The same 1300°C EN417 head, with the two things that keep a cartridge torch working: replacement seals and a repair screwdriver. The seal at the cartridge joint is the part that ages first - it hardens, stops sealing and the torch starts hissing at the valve. With a spare seal and the right driver in the box, that is a two-minute fix instead of a replacement torch. Threads onto any standard EN417 butane cartridge.
FS-BRAZING-RODS
Brazing Rods - Aluminium & Copper (Sold Separately)
The rods on their own, once you already run a cartridge torch. Low-temperature aluminium and copper rods that braze at the kind of heat a 1300C butane torch gives you - the same rods that ship in our head-and-rods pack, so if you proved the flame there, this is the top-up order. Tell us the metals you join and we confirm rod diameter, alloy and pack count in your quote.
Guides that cover this part
GUIDE
Which blowtorch for soldering copper pipe?
For 15 and 22 mm capillary joints a butane EN417 cartridge torch with a soldering nozzle is enough - flame shape beats power. When 28 mm work needs oxy-fuel.
GUIDE
How to clean a clogged torch nozzle
Ragged yellow flame? Sooting nozzle? Clean it the right way: pick the correct wire size, clear the orifice without enlarging it, and know when to replace.
GUIDE
Which cartridges are EN417, and what fits them?
EN417 covers the cartridge and its valve, not your torch. How to spot a true EN417 can, why the label is abused, and how to confirm the fit.
GUIDE
Butane vs propane torches: what changes at the bench
How butane and propane differ on real work: cold weather, flame heat, wind, running cost, and when a cartridge head is no longer enough.
GUIDE
How to solder copper pipe with a blowtorch, step by step
Clean, flux, heat the fitting, feed the solder: the full capillary joint sequence for 15 and 22 mm copper pipe, plus the five mistakes that ruin joints.
GUIDE
How to braze aluminium with a torch: rods, flux and flame control
Low-temperature aluminium brazing with a cartridge or propane torch: rod choice, oxide control, flux, and the joints this process can and cannot handle.
Questions
Does the fan need batteries?
No - the fan is driven by the gas flow itself, so there are no batteries to replace and nothing to charge.
What can 1300°C actually do?
It softens solder and brazing filler fast, chars and strips, and handles small metal-tube soldering jobs. It will not weld steel - for that you need oxy-fuel - but for cartridge-torch work it is the top of the temperature range.
Is a cartridge included?
No. We never ship gas: the head runs on standard EN417 butane cartridges (Campingaz CV270 / CV300 / CV470 or any equivalent) that you buy locally.
Is this a genuine Campingaz part?
No. Universal EN417-standard head, independent third-party spare, not affiliated with Campingaz.
Is the 604 tested to EN 13611?
Yes - the 604 is inside the EN 13611:2019/AC:2021 test scope in report CTG2601200434K-SR04AS (tested under reference ZK604), issued by Shenzhen CTG Testing Co., Ltd in January 2026, with a third-party Verification of Conformity valid to 2031. The full report and VoC travel with your quotation. Note what that is and is not: a test report and a voluntary verification, not an EU-type examination by a Notified Body.
Can't find your fit? Send us your torch model - we'll match it for free.