FS-EN417-HEAD-RODS
EN417 Torch Head + Test Brazing Rods (Aluminium & Copper)
The same 1300°C EN417 head, supplied with a test pack of aluminium and copper brazing rods. The point is to prove it on your own work before committing to bulk: light it, braze a scrap joint, and judge the finish yourself. Rods travel alongside the head, so one order gets you both. Screws onto a standard EN417 butane cartridge - no cylinder, no hose.
Campingaz CV270 / CV300 / CV470 are examples of the EN417 cans our trade buyers stock - model names are not a brand-fit claim; we confirm the fit against the cartridge you hold. Tell us the metals you join and we confirm the right rod for the job. Cartridge not standard EN417? Details → /contact/.
Sizes
| SPEC | VALUE |
|---|---|
| Max flame temperature | 1300°C |
| Body material | Iron + zinc alloy |
| Ignition | Electronic piezo |
| Flame stabilisation | Built-in air-mix fan |
| Net weight | 150 g (head) |
| Fuel | Butane (EN417 cartridge, not included) |
| In the box | Torch head + test pack of aluminium and copper brazing rods |
| Carton pack | 100 pcs (head) |
CONFIRMED PER ORDER
These are set against the metals and the joint you are working with, so they are agreed in writing before the order ships rather than guessed on this page:
- Rod diameter, alloy and pack count - the test pack is built around the metals you join, so we set the rod and the pack size with you before dispatch
Everything above this box is fixed and published. Ask in the form below and we return the figures for your order in writing.
Fits these torch models
Not sure your model is covered? Send it to us and we'll confirm the right part before you order - free fit matching.
Ask About Your ModelASK ABOUT THIS PART
Not sure it fits? Ask here.
Send the torch you run and what you need. We confirm the fit, the size and the pack before you commit to an order - one business day, no obligation.
Prefer the full form (country, quantities, wholesale)? Open the contact page.
Specification
- Iron and zinc-alloy body
- Electronic piezo ignition - no flint wear
- Built-in air-mix fan for a stable flame in draughts
- Aluminium and copper brazing rods supplied as a test pack
- RoHS/REACH statement in About
- Check local gas-appliance rules before fitting (EU/UK GAR applies to gas appliances; this is a spare part)
Pairs well with
FS-EN417-HEAD
EN417 Torch Head (1300°C, Cartridge Torch)
The hot head of the EN417 range, on its own. Electronic piezo ignition fires it with one thumb, a built-in air-mix fan holds the flame steady in draughts, and the burner reaches 1300°C - hot enough for metal-tube soldering, small brazing jobs and workshop heating that defeats ordinary heads. It threads straight onto a standard EN417 butane cartridge: no cylinder, no hose, nothing pressurised in the post.
FS-EN417-HEAD-KIT
EN417 Torch Head + Service Kit (Spare Seals & Screwdriver)
The same 1300°C EN417 head, with the two things that keep a cartridge torch working: replacement seals and a repair screwdriver. The seal at the cartridge joint is the part that ages first - it hardens, stops sealing and the torch starts hissing at the valve. With a spare seal and the right driver in the box, that is a two-minute fix instead of a replacement torch. Threads onto any standard EN417 butane cartridge.
FS-BRAZING-RODS
Brazing Rods - Aluminium & Copper (Sold Separately)
The rods on their own, once you already run a cartridge torch. Low-temperature aluminium and copper rods that braze at the kind of heat a 1300C butane torch gives you - the same rods that ship in our head-and-rods pack, so if you proved the flame there, this is the top-up order. Tell us the metals you join and we confirm rod diameter, alloy and pack count in your quote.
Guides that cover this part
GUIDE
Which blowtorch for soldering copper pipe?
For 15 and 22 mm capillary joints a butane EN417 cartridge torch with a soldering nozzle is enough - flame shape beats power. When 28 mm work needs oxy-fuel.
GUIDE
Soldering vs brazing: which one does your joint need?
Where soldering ends and brazing begins: the temperature convention, joint strength, filler form, flux needs, and the torch each one asks for.
GUIDE
How to choose a brazing rod for the metal in front of you
Choosing a brazing rod starts with the parent metal, not the torch. How to match rods to aluminium, copper and mixed-metal joints on an air torch.
GUIDE
How to braze aluminium with a torch: rods, flux and flame control
Low-temperature aluminium brazing with a cartridge or propane torch: rod choice, oxide control, flux, and the joints this process can and cannot handle.
Questions
What rod sizes are in the pack?
Tell us the metals you join - copper tube, aluminium sheet, mixed metals - and we will confirm rod diameter, alloy and pack count in your quote. The test pack exists so you can prove the finish on your own scrap before ordering bulk.
Will the head braze aluminium?
The burner reaches 1300°C, which is the top of the range for cartridge torches and enough for low-temperature aluminium brazing rods on small sections. For structural aluminium work you need oxy-fuel - tell us the job and we will say honestly whether this torch does it.
Are the rods sold separately?
Yes, once you know the rod you want - the test pack is for proving the flame. Ask for bulk rod pricing on the inquiry form.
Is a cartridge included?
No. We never ship gas: the head runs on standard EN417 butane cartridges bought locally.
Can't find your fit? Send us your torch model - we'll match it for free.