Brazing Nozzle No. 10

The single most re-ordered brazing size in the range. No. 10 is the default for medium brazing on copper tube and fittings — buy it on its own when the set’s middle nozzle wears or you run a second torch.

FITS // Standard oxy-fuel torch heads — British No. series brazing seat

Same seat family as the 3-size set — the set’s No. 10 slot and this single are interchangeable. Torch not listed? Send the model → /contact/.

Request Availability View Compatibility Chart

⚠ DIMENSIONS & FIT DATA ARE PLACEHOLDERS — VERIFY AGAINST MANUFACTURER CATALOGUES BEFORE ORDERING

01 / SIZE TABLE

Sizes

SIZE NO.	ORIFICE Ø ⚠	ACETYLENE FLOW ⚠	TYPICAL USE
No. 10	0.85 mm	120–190 g/h	medium brazing, 15–22 mm tube and fittings

02 / FITMENT

Fits these torch models

FITS // Standard oxy-fuel torch heads — British No. series brazing seat

Not sure your model is covered? Send it to us and we'll confirm the right part before you order — free fit matching.

Ask About Your Model

03 / MATERIALS & SPECS

Specification

→Brass body, machined orifice ⚠
→Rolled seat ⚠
→RoHS/REACH statement in About

04 / RELATED

Pairs well with

FS-BRAZING-NOZZLE-SET

Brazing Nozzle Set (3 Sizes)

The brazing category hero: three workhorse brazing nozzle sizes in one wallet case, sized to the British No. series. Covers light, medium and heavy brazing on tube, sheet and cast — one set for the bench instead of three separate orders.

FS-OXA-NOZZLE-5

Acetylene Welding Nozzle No. 5

The single UK reorder king of the welding series. No. 5 is the default acetylene welding size for medium plate and heavier fillets — the one workshops reorder on its own, so we stock it as a single.

FS-CLN-12

Tip Cleaner Set, 12 Sizes

Twelve calibrated cleaning wires in a pocket case — the entry SKU and the universal companion to every nozzle on the site. A ragged flame usually means a dirty orifice; this set fixes it for less than the cost of one cartridge.

05 / FAQ

Questions

+What’s the difference between this and a welding nozzle of the same number?

Brazing nozzles are shaped for a wider, softer flame envelope than welding nozzles; the number series is separate from the acetylene welding No. 1–25 series. See /learn/brazing-nozzle-size-chart/.

+Is No. 10 right for silver-soldering small fittings?

For fine silver-solder work step down to No. 8; No. 10 suits general pipe and fitting brazing.

Can't find your fit? Send us your torch model — we'll match it for free.