COLLECTION 01 / BRAZING
BRAZING NOZZLES
Brazing nozzles are the workhorses of oxy-fuel work: they hold a stable flame that heats the joint and melts the brazing rod without burning the base metal. Sized by British No. series, they suit oxy-acetylene and oxy-propane rigs — pick the size for your joint, not your torch.
INDICATIVE SIZING — ACETYLENE FIGURES SHOWN; PROPANE EQUIVALENTS ON EACH PRODUCT PAGE
| NO. | ORIFICE Ø ⚠ | GAS FLOW ⚠ (ACETYLENE) | TYPICAL BRAZING JOB |
|---|---|---|---|
| No. 5 | ⚠ mm | ⚠ l/h | Light silver brazing on small-bore tube and fine assemblies |
| No. 10 | ⚠ mm | ⚠ l/h | Small fittings, capillary joints and general light brazing |
| No. 13 | ⚠ mm | ⚠ l/h | General brazing of copper, brass and steel up to medium section |
| No. 16 | ⚠ mm | ⚠ l/h | Heavier joints, larger fittings and light pre-heat |
| No. 20 | ⚠ mm | ⚠ l/h | Heavy brazing on thick section and large fittings |
| No. 25 | ⚠ mm | ⚠ l/h | Heaviest brazing and substantial pre-heat work |
All orifice and flow values are placeholders — to be verified against manufacturer catalogues before launch.
PRODUCT GRID — Brazing Nozzle Set (3 sizes) — the category hero; Brazing Nozzle No. 10 — most-reordered single size. Single numbers in between are added as stock grows.
PRODUCTS IN THIS RANGE