FS-EN417-SOLDERING
EN417 Soldering Nozzle
The soldering nozzle for copper-pipe work on an EN417 butane cartridge. A steady medium flame sized for 15 and 22 mm capillary fittings — the nozzle plumbers reach for when the blowtorch stays in the van.
No cylinder, no hose. Cartridge not standard? Send details → /contact/.
⚠ DIMENSIONS & FIT DATA ARE PLACEHOLDERS — VERIFY AGAINST MANUFACTURER CATALOGUES BEFORE ORDERING
01 / SIZE TABLE
Sizes
| NOZZLE | ORIFICE Ø ⚠ | GAS FLOW (BUTANE) ⚠ | TYPICAL USE |
|---|---|---|---|
| Soldering | 0.40 mm | 130–170 g/h | 15/22 mm copper pipe soldering, fittings |
02 / FITMENT
Fits these torch models
Not sure your model is covered? Send it to us and we'll confirm the right part before you order — free fit matching.
Ask About Your Model03 / MATERIALS & SPECS
Specification
- Brass nozzle with EN417 union thread ⚠
- Machined orifice ⚠
- RoHS/REACH statement in About
- Check local gas-appliance rules before fitting
04 / RELATED
Pairs well with
FS-TOR-SOLDERING-KIT
Soldering Torch Kit (Handle + 3 EN417 Nozzles)
The plumbing hero: a complete air torch — handle plus fine, soldering and spreader nozzles — that runs on standard EN417 butane cartridges. Tested to EN 521:2019+AC:2019 (portable vapour-pressure LPG appliances, GAR (EU) 2016/426). No gas cylinder — ships worldwide: cartridges are bought locally at any hardware shop, so there is nothing pressurised in the post.
FS-EN417-SPREADER
EN417 Spreader Nozzle
Broad, soft flame for jobs a pencil flame does badly: heat-shrink sleeving, shrink-fit, paint softening and warming seals. Spreads the heat across a wide face instead of pointing a hot spike at one spot.
FS-EN417-FINE
EN417 Fine-Flame Nozzle
Fine pencil flame on the standard EN417 threaded butane cartridge. Screws straight onto the cartridge valve — made for jewellery, small silver-solder work, baking and any job needing a precise, small flame.
FS-CLN-12
Tip Cleaner Set, 12 Sizes
Twelve calibrated cleaning wires in a pocket case — the entry SKU and the universal companion to every nozzle on the site. A ragged flame usually means a dirty orifice; this set fixes it for less than the cost of one cartridge.
05 / FAQ
Questions
Will this solder 22 mm pipe?
Yes, with the right technique and flux: the medium flame keeps the fitting hot without scorching the flux. For sustained runs, fit it on the fs-tor-soldering-kit handle for better control.
Is this a genuine Campingaz part?
No. Universal EN417-standard nozzle, independent third-party spare, not affiliated with Campingaz.
Can't find your fit? Send us your torch model — we'll match it for free.